Home
UV  and IR Flame Detector (Ex)
Reflective Beam Detector
Addressable/Intelligent  fire alarm
Conventional Fire alarm series
Promotional products
Domestic fire alarm
Addressable Fire Alarm System
Conventional Fire Alarm System
Product Catalog
Battery Powered smoke detector
Conventional Smoke Detector
Conventional Heat Detector
Conventional Fire Alarm Control Panel
Fire Fighting System
 Manual Call Point bell strobe
Gas Detector and Co Detector
4wire detector with relay output
TC Addressable fire alarm system
Infrared Alarm System
Addressable Fire Alarm System
News
Contact Us
Documents

Product Catalog 

 

Stand alone 9v battery operated photoelectric smoke detector

  • Stand alone 9v battery operated photoelectric smoke detector
  • Stand alone 9v battery operated photoelectric smoke detector
Model No.︰DG822
Brand Name︰ZC
Country of Origin︰China
Unit Price︰US $ .3.68 / pc
Minimum Order︰100 pc
Share on:

 Total 7 Related Items 
Prev34567Next

Product Description

 

 Single smoke detector according to EN14604:2005

 

 DG822  Battery Powered Photoelectric Smoke Alarm with excellent stability and high-sensitivity.

 

 Key Specifications/Special Features

Power Source: 9V Battery (included).

Audio Alarm: ≥ 85dB/3m

Temperature Range: 0℃ to 40℃

Humidity Range: 5%-95% relative humidity(RH)

 Sensor: Photoelectric

Size: diameter 105mm in diameter x59mm depth

Interconnects: Yes

 Easy to install with mounting base included

 Suitable for any room

 Low battery signal

Test button for simple testing

1. RECOMMENDED LOCATIONS FOR ALARMS
• Locate the first alarm in the immediate area of the bedrooms but
not in the bedrooms. Try to protect the exit path as the bedrooms
are usually farthest from the exit. If more than one sleeping area
exists, locate additional alarms adjacent to each sleeping area.
• Locate additional alarms in the bedrooms if required.
• Locate additional alarms to protect any stairway as stairways act
like chimneys for smoke and heat.
• Locate at least one alarm on every floor level.
• Locate an alarm in every room where electrical appliances are
operated (i.e. portable heaters or humidifiers).
• Locate an alarm in every room where someone sleeps with the
door closed. The closed door may prevent the alarm from waking
the sleeper.
• Smoke, heat, and combustion products rise to the ceiling and
spread horizontally. Mounting the smoke alarm on the ceiling in the
center of the room places it closest to all points in the room. Ceiling
mounting is preferred in ordinary residential construction.
• When mounting an alarm on the ceiling, locate it at a minimum of
4” (10 cm) from the side wall (see Figure 1).
• When mounting the alarm on the wall, it is best to use an inside
wall with the top edge of the alarm at a minimum of 4” (10 cm) and a
maximum of 12” (30.5 cm) below the ceiling, (see Figure 1).
• Put smoke alarms at both ends of a bedroom hallway or large
room if the hallway or room is more than 30 feet (9.1 m) long.
• Install Smoke Alarms on sloped, peaked or cathedral ceilings at or
within 3ft (0.9m) of the highest point (measured horizontally). (see
Figure 2).

 

  

 

Payment Terms︰T/T,WU,PAYPAL
Product Image



Related Products
Independent Battery Powered Photoelectric Smoke Alarm
Independent Battery Powered Photoelectric Smoke Alarm
US $ 7
Independent smoke
AC220v Battery Powered Photoelectric Smoke Alarm
US $ 7
smoke detector
Wireless single smoke detector 9V battery
US $ 5
dc power smoke alarm
Battery Powered Photoelectric Smoke Alarm
US $ 5

Home  |  UV and IR Flame Detector (Ex)  |  Reflective Beam Detector  |  Addressable/Intelligent fire alarm  |  Conventional Fire alarm series  |  Promotional products  |  Domestic fire alarm  |  Addressable Fire Alarm System  |  Conventional Fire Alarm System  |  Product Catalog  |  News  |  Contact Us  |  Documents  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com