Conventional Heat Detector, Operates by Advanced MCU Expert Algorithm Software.
Key Specifications/Special Features
•This Conventional Fixed & Rate-of-Rise Heat Sensor uses a thermal sensing Element for detection
•This detector is designed to provide open area protection and to be used with most conventional fire alarm control panels where it can work from 9Volts to 32V D.C.
•It has Two LEDS on each detector to provide a local 360° viewing alarm indication.
•It flashes every five seconds, indicating that power is applied and the detector is working properly.
•The LEDS latch on in alarm. The LEDS will be off when a trouble condition occurs indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.
•This detector supports External Remote indication LED.